Time switch MS65
Time switch MS65
The timer MS65 is modular, silent, and driven by a synchronous motor that can be supplied in several setting due to its design and compact size.
Two families of timers are available: standard MS65 with a linear time scale and MS65-2E with a double time scale (double speed).
The advantages:
• compact size;
• flexibility, thanks to technical adaptations and numerous options provided on demand for a wide range of applications;
• reliability.
The Time switch MS65 have already convinced and satisfied many manufacturers around the world.
Time switch MS65 Linear Scale
Description | Modular time switch for appliances |
Application | Professional ovens, mini wash, toaster, deep fryers, steamer cookers, grills, solarium, saunas, heaters, fans, battery chargers, industrial applications. |
Electrical Connection | Terminal Tab 6,35*0,8 |
Shaft material | Aluminum Ø 6.0mm |
Shaft length | Customized |
Fixing | M3 and M4 or central nut |
Time setting | Clockwise or anti clockwise |
Power Supply Voltage | V= 100 V to 250 V; frequency f= 50-60 Hz |
Motor | Synchronous with hard ferrite rotor ( 500 rpm) |
Contact load rating | 16(4) A – 250 V ~ 10,000 cycles |
Configuration | 1 or 2 contacts: SPST- DPST – SPDT..Number of contacts – 1 to 6 group (1 to 3 layers) |
Timing range | 60 sec to 48 hours on a standard wind-up angle of 300° |
Option | Hold position; plastic knob; Bell at the end of the cycle |
Tracking index | KC 250V |
Glow wire | 850°C |
Operation Temperature | T85°C |
Approvals | Dekra (ENEC KEMA-KEUR) certificate N°2167272.01 Standard references: EN60730-1:2011; EN 60730-2-7:2010 Clause 30 of EN 60335-1:20 |
Approvals | Underwriters Laboratories Inc. (UL) certificate N°201311089-E464763. Standard references: UL917 – Clock Operated switches CSA C22.2 N° 177-92 – Clock Operated Switches |
Time switch MS65 Double scale
Description | Modular time switch for appliances |
Application | Professional ovens, microwave Owens, industrial applications |
Electrical Connection | Terminal Tab 6,35*0,8 |
Shaft material | Aluminum Ø 6.0mm |
Shaft length | Customized |
Fixing | M3 and M4 or central nut |
Time setting | Clockwise |
Power Supply Voltage | V= 187 V to 250 V; frequency f= 50 Hz. |
Motor | Synchronous with hard ferrite rotor ( 500 rpm) |
Contact load rating | 16(4) A – 250 V ~ 10,000 cycles |
Configuration | 1 or 2 contacts: SPST- DPST – SPDT.. Number of contacts – 1 to 6 group (1 to 3 layers) |
Timing range | 50 minutes to 120 minutes on a standard wind-up angle of 300° |
Option | Hold position; plastic knob; Bell at the end of the cycle |
Tracking index | KC 250V |
Glow wire | 850°C |
Operation Temperature | T85°C |
Approvals | Dekra (ENEC KEMA-KEUR) certificate N°2167272.01 Standard references: EN60730-1:2011; EN 60730-2-7:2010 Clause 30 of EN 60335-1:20 |
Approvals | Underwriters Laboratories Inc. (UL) certificate N°201311089-E464763. Standard references: UL917 – Clock Operated switches CSA C22.2 N° 177-92 – Clock Operated Switches |
